Then run. Which will install the main lirc daemon and configure it to start on boot. Ubuntu 8. All that is required is to install lirc as noted above , and follow the prompts. An alternative to LIRC is ir-keytable, which once installed with an already recognized MCE reciever and remote should work out of the box. The package lirc-modules-source allows you to build the required modules. This will present a screen where you can select the desired modules.
You need at least lirc-dev and either lirc-mceusb or lirc-mceusb2 to get things working. If unsure, select both lirc-mceusb and lirc-mceusb2. For my Gentoo 2. I will add more to this as I understand it better, but for right now I finally have this working.
Any help on Wiki Formatting would also be appreciated. Fedora follows upstream, and is currently in the process to release 0. It utilizes dynamic drivers, systemd-based services and the latest kernels with all relevant lirc drivers in the staging area included.
You will need to copy the files to their final location, as hinted by lirc-setup. This was designed to allow you to turn on and off your television and control the TV volume. Only the following MCE buttons are able to be programmed:. The MCE remote control lights will blink twice to confirm that the buttons have been reset. If the default settings were not restored the lights blink quickly four times error. See Customized Remote Control Keys. The suggestions apply to all remote controls, not just MCE remotes.
Beats shutting down and booting up to save power. I am a Gentoo user, so only use this as an example. Since kernel 2. Also, if using recent nVidia proprietary drivers, you can remove it from hibernate's blacklisted modules. Be sure irexec is running, you can add this in your. Kernel changes require you to explicitly power USB devices during sleep. If after following the above the PC does not wake from sleep:.
This works for me on mythbuntu Once your remote is working its easy to blast. Make note of the NAME portion of the remote definition. When navigating the menus in Mythtv, it may appear that each time you hit the up or down arrow, that the button his hit twice but if you are using irw, the button only appears to be pressed once.
This is likely caused by another kernel module that is attempting to treat the mce remote as a keyboard. As a test try unloading a few modules. This should reset the firmware. If you cannot get it close enough, it probably will not work. It's also possible that there is infrared light interference. Certain LCD displays are known to interfere with infrared remotes.
Try turning off possible interference sources, shielding the receiver sometimes putting the receiver inside an open cabinet, behind a semi-transparent door, or putting a thin paper towel over the receiver helps. Those using the mceusb2 module for the newer MCE remote may want to implement Maciek Klimkowski's patch to make the remote feel a little more responsive and detect repeat keys properly.
To install the patch, change directories to the directory that lirc unzipped to. Tip: Even with lirc A possible work around is to renice lircd to a very high priority.
You can adjust the sensitivity of the remote by adjusting settings in the lircd. Information on what each setting in the lircd. Jump to: navigation , search. Navigation menu Personal tools Log in. Namespaces Page Discussion. Views Read View source View history. This page was last modified on 27 November , at Details required : characters remaining Cancel Submit.
When I close Media Center application, after 20 seconds twenty ehtray. It gives you easy access to the digital media manager. This is a user dependent process you can disable it.
To disable it from startup entry, right click on taskbar , click on Task Manager. Under process , right click on the media center process and click on End task and check the issue. This process ehtray. Can you provide me with the information how I can check what is killing this process ehtray. But the real problem seems to be that ehtray. When I press green button for the first time ehtray. If I do nothing this ehtray. Pressing again results in starting ehtray. Are you using any 3rd party anti-virus software?
If yes, then try disabling that and check if it helps. If the Windows Media Center works fine after disabling, then you have to provide exceptions for WMC and it's processes in the Anti-virus Software as well as the Firewall. To do this you have to contact the Anti-virus Software vendor.
I am not using any 3rd anti-virus software. The only anti-virus software that i am using is build in Windows Defender. I can confirm this. I have exactly the same problem and came to the same conclusion: pressing once on the green windows button launches ehtray.
If you press again on this button within these 10 seconds, then WMC starts, otherwise nothing happens. You can also manually start ehtray. After that, within 10 seconds, you can launch WMC with the windows green button pressing only once. I have used this remote with Windows 7 with both 32 and bit without any problems.
What is the solution so that pressing only one time is enough to start Media Center? This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question 6. Report abuse. Details required :. Cancel Submit. Sharief K. Hi, You may try to disable and enable the Human Interface Devices and check if it helps. Please update us with the results. We will be glad to assist you. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site.
In reply to Sharief K's post on March 15, Red arrows are "usb devices" which are disappeared when eHome ir-receiver is disconnected. Which USB devices exactly do I need to disable? I think that I found the problem.
0コメント